FRONT PANEL: Anodized silver. Blue power indicator. Left/Right microphone jacks. Selector : mic, phono, tape 1, tape 2, tuner, aux. Bass and treble slider controls (for each channel) – Volume. Speaker system 1 and 2 push-buttons. Headphones jack. Push-buttons on the left lower side: Tape monitor : 1 / 2, mono in L/R. Balance slider control. Push-button on the right lower side: low filter, high filter, muting (-20 dB), loudness, power.
PANNELLO FRONTALE : Anodizzato argento. Spia di accensione blu. Ingressi microfono. Left/Right. Selector : mic, phono, tape 1, tape 2, tuner, aux. Controlli separati per canale Bass e treble. Volume. Pulsanti speaker system 1 and 2. Ingresso cuffia. Pulsanti in basso a sinistra: Tape monitor : 1 / 2, mono in L/R. Controllo Balance a slitta. Pulsanti in basso a destra: low filter, high filter, muting (-20 dB), loudness, power..
BACK PANEL: AC outlets: 2 switched (300 w max), 1 unswitched (300 w max). Fuse (4 A).Speaker systems 1 and 2. Links: phono, Tape 1 in and out, tape 2 in and out, tuner, aux, pre-amp out, (main) in. Scope in (left/right). Ground binding post.
PANNELLO POSTERIORE : Prese AC: 2 switched (300 w max), 1 unswitched (300 w max). Fusibile (4 A).Speaker systems 1 and 2. Collegamenti: phono, Tape 1 in and out, tape 2 in and out, tuner, aux, pre-amp out, (main) in. Ingresso per oscilloscopio (left/right). Collegamento di terra.
Size : 5 3/4″H, 15 3/8″ W and 14″D. Weight 32,5 lbs. c.a
ELECTRICAL
Stereo. Solid state.
60 w/ch RMS (8 Ohms) – 70 w/ch (4 Ohms)
Response 20 – 40kHz ± 0.5 dB.
Total harmonic distortion (THD) : < 0.2 % at rated output.
Intermodulation distortion : 0.15 %.
Damping factor : > 30 into 8 Ohms.
Fusing : 4 A – 250 V BUSS MTH
Power consumption : 120 W (at full power)
Year of construction: 1973 – 1975
Are available on request:
- the owner’s manual
- the service manual (incomplete) and schematics
- the abstract of testing performed by Italian hi-fi magazine Stereoplay (no.7,1973)
DIMENSIONI: 39 X 14,5 X 35,6. Peso 12 kg.
CARATTERISTICHE
Amplificatore integrato stereo a transistor.
Potenza 60 W RMS per canale (8 Ohm) – 70 W per canale (4 Ohm)
Risposta 20 – 20kHz ± 0.5 dB.
Distorsione armonica totale : < 0.2 %
Distorsione di intermodulazione : 0.15 %.
Fusibile : 4 A – 250 V BUSS MTH
Consumo : 120 W (a pieno regime)
Anni di produzione : 1973 – 1975
Sono disponibili a richiesta:
- il manuale di istruzioni (in inglese)
- il manuale di servizio (in inglese e incompleto) con gli schemi
- l’estratto della prova tecnica eseguita dalla rivista Stereoplay (n.7, 1973)